📚
SLG-20 Retractable Landing Gear Manual
  • Home
  • Safety Notice
  • Operation
    • Operation Overview
    • Control States
    • Input Signal Requirements
    • Parameter System
    • Pre Flight Checks
    • Spring Tension & Replacement
    • Auto Calibration & Servo Insertion
  • Console Interface
    • Using the Console Interface
    • Accessing the Console Interface on Windows
    • Accessing the Console Interface on Mac
  • Firmware and Software
    • Firmware Update Procedure
    • Firmware Releases
    • Loader Releases
  • Installation
    • SLG-20-AX Quick Start Guide
    • SLG-20 Quick Start Guide
    • Mounting and Hole Patterns
    • Electrical
    • Assembling Legs
  • Reference
    • Known Issues
      • Roll Oscillations on New Alta X Model
    • Servo Types
    • Payload Clearance
Powered by GitBook
On this page

Was this helpful?

  1. Reference

Servo Types

PreviousRoll Oscillations on New Alta X ModelNextPayload Clearance

Last updated 2 years ago

Was this helpful?

There are three types of servos that can be used with the SLG-20.

Both servos connected to the SLG-20 control board must be of the same type.

Use the image below to determine which type you have - this is needed to set the SRV_TYPE parameter.

Servo Type Identification