Kit Contents
What's in the R2 Exoskeleton kit?
Last updated
What's in the R2 Exoskeleton kit?
Last updated
M4 x 12mm Screws: 12 total (3 per end, 2 ends per strut, 2 struts)
M3 x 12mm Screws: 12 total (4 per clamp for 2 clamps, 4 per front clamp)
Rear Clamp: 1 (Includes Long Slot 3D Printed Part)
Top Clamp: 1 (Includes Bent Hexagon-Shaped 3D Printed Part)
Bottom Clamp: 2 (Each includes a Square 3D Printed Part)
Support Strut Left: 1
Support Strut Right: 1
The is a safety bracket designed to secure the Ronin camera cage to the pan motor using an included safety cable. We recommend it alongside the Exoskeleton because, while the Exoskeleton addresses the weakest part of the Ronin, the Ronin-Majig provides an additional layer of security by protecting against potential failures in the roll motor, the Ronin's next weakest point. This is just an added layer of safety and such a simple device makes this easy.
Inspired by XM2's Thingymajig for MoVi Pro, the Ronin-Majig offers a common attachment point for a paracord between the Ronin-Majig and your camera/payload. It does not interfere with the Ronin 2 pan axis adjustments, movements, power cables, or batteries it still allows full 360 movement of the gimbal.
The is designed to balance heavier camera setups by adding weight to the R2 Exoskeleton’s Wings. This set includes two 1-inch counterweights, side bracket attachments, and bolts, allowing precise adjustment to maintain a level setup and support larger camera systems without compromising the Ronin 2’s performance.
The and Exoskeleton Counterweight Set are essential accessories for optimizing the balance and functionality of the DJI Ronin 2 Gimbal. The R2 Exoskeleton Shelf mounts to the back of the R2 Exoskeleton, providing a platform for additional accessories like video transmitters and Master wheels receivers. Its through-hole slots allow for better weight distribution by using mounted accessories as counterweights, enhancing the gimbal’s performance.
