HD FPV System for Alta X | Operating Handbook
XM2 StoreXM2 Product Manuals
  • HD FPV System for Alta X
    • System Overview
    • Getting Started
      • How to Install the VTX into the HD FPV Camera Bay
      • How to Install the HD FPV Camera Bay into the Alta X
      • How to Install the Brain Bay into the Alta X
      • MAVTx OSD: Quickstart Setup Guide
  • Alta X Brain Bay
  • MAVTx | Software Overview
    • Updating MAVTx Firmware
  • XM2 Product Support
Powered by GitBook
On this page
  • Firmware Releases
  • Flashing
  1. MAVTx | Software Overview

Updating MAVTx Firmware

How to update the MAVTx firmware on your Brain Bay

PreviousMAVTx | Software OverviewNextXM2 Product Support

Last updated 2 months ago

Firmware Releases

Flashing

  • Hold the boot button on the Brain Bay PCB (gold and silver button on the top left).

  • While holding the button, plug in the USB-C cable to your computer.

  • Wait a few seconds until the board appears as a flash drive named "RPI-RP2".

  • The LED on the front of the Brain Bay PCB should be solid white at about half brightness.

  • Once the drive appears, copy and paste the "mavtx-X.X.uf2" file to the drive.

  • Wait a few seconds for the PCB to reboot automatically.

  • The LED on the front should return to flashing.

  • If nothing happens after 20 seconds, retry the flashing process.

LogoReleases · XM2Labs/MAVTx-Firmware-ReleasesGitHub